Märklin 60832 – m83 accessory decoder

Available examples

Each example has its own photos, condition and price.

Sales offer

Märklin 60832 – m83 decoder

Condition and actual contents: see the offer description and photos.

€67,99 EURAvailable

View this example

Image gallery

Model images and additional photos from linked listings. Condition and included items apply only to the specific listing.

Märklin 60832 – m83 accessory decoder – image from the Iberplace catalogue — Reference image from the product catalogue. See the individual offer for condition and contents. · Iberplace catalogue

Technical data

Manufacturer: Märklin
Reference: 60832
Model size: No scale

Equipment and technical details

Identification

Manufacturer / reference: Märklin 60832
Gauge / scale: No scale

Märklin 60832 m83 for switching turnouts, signals and uncoupler tracks; eight outputs controlled separately or in pairs. Factory setting for up to four turnouts.

The product page specifies Motorola addresses up to 320 and DCC up to 2040, set by coding switches or programming track in groups of four. Stated maximum total load: 3 A. Lift-type screw terminals.

mfx is used for registration and configuration; switching still operates under MM or DCC. mfx registration requires Central Station 60215 or higher. Switch 10: OFF for MM, ON for DCC. After mfx registration, configuration uses mfx rather than MM parameters/DCC CVs.

Power from track or 66360 only together with 60822. Connect m83/m84 directly: no extension cables between side contacts and no additional track connection. Motor drives require one 60821 per output pair.

Disconnect all power before wiring or changing switches. Do not open the housing; dry indoor use only. Strip and twist wire ends without tinning before clamping.

CV79: mode 0, four turnouts/4 addresses; 1, eight momentary switches/4 addresses without status display; 2, eight switches/8 addresses; 3, blinking and random/8 addresses; 4, fluorescent street lighting/8 addresses; 5, energy-saving lighting/8 addresses.

Output configuration uses CV112–135; pulse width and period are separate settings. Recommended for C turnouts: 30% and 0.25 s; K/M: 75% and 0.5 s. Configure via mfx after mfx registration.

The 2026 lighting supplement requires shunt resistors and correct polarity for LED lights 72800/72804/72809 as shown in its wiring diagram. The 19 V, maximum 200 mA incandescent-lamp example is not a universal direct LED connection approval.

The original DCC and mfx table retains unusable rows and empty values. These are mode values, not F keys. The repeated value 138 for Gyro Light is retained from the source and remains unresolved. Spanish mode 8 is clarified as light fade in/out using DE/EN.

The pictogram specifies adults only; the product warning block also mentions children under three. Check the actual offer for the example’s condition and accessories.

DCC and mfx output functions

Button	Switch	Designation	Remarks
0	128	Everything Off
1	129	Dimmer
2	130	Blinking Light 1
3	131	Blinking Light 2	Inverse blinking light to Blinking Light 1
4	132	Flash 1	Flashing light
5	133	Flash 2	Double flashing light
6	134	Random Display / Light Flickering	Random sequence of pause/pulse
8	136	Light fade in/out	Soft on/off action
9	137	Mars Light	Defined blinking light
10	138	Gyro Light	Defined blinking light
—	—	Light according to Rule ...	Cannot be used
—	—	Light according to Rule ...	Cannot be used
13	141	Neon Lights	Simulates fluorescent lights
14	142	Energy-Saving Light	Simulates energy-saving lights
15	143	Uncoupler Track
16	—	Switching	"Period" indicates the max. switching duration
17	—	Min. Switching	"Period" indicates the min. switching duration
18	—	Sensor Switching	Switching duration is "Period" or until end shutoff position is reached
		Turn On	Cannot be used

Märklin 60832

Model knowledge

Model history

Märklin 60832 m83 for switching turnouts, signals and uncoupler tracks; eight outputs controlled separately or in pairs. Factory setting for up to four turnouts.

The product page specifies Motorola addresses up to 320 and DCC up to 2040, set by coding switches or programming track in groups of four. Stated maximum total load: 3 A. Lift-type screw terminals.

mfx is used for registration and configuration; switching still operates under MM or DCC. mfx registration requires Central Station 60215 or higher. Switch 10: OFF for MM, ON for DCC. After mfx registration, configuration uses mfx rather than MM parameters/DCC CVs.

Prototype history

Märklin 60832 m83 for switching turnouts, signals and uncoupler tracks; eight outputs controlled separately or in pairs. Factory setting for up to four turnouts.