Märklin 67014 – Z controller with power supply · 120 V · USA

Direct speed and direction control for your Z layout, combining a train controller with its mains power supply.

Scale: Z
Reference: 67014

Märklin 67014 – Z controller with power supply · 120 V · USA · Z

Manufacturer image of the original model. The condition and contents of Second-Hand examples are described in each offer.

Märklin / Gebr. Märklin & Cie. GmbH

Adults only

Pre-order

Märklin 67014 – Z controller with power supply · 120 V · USA · Z

€129,00 EUR

View this example

Image gallery

Model images and additional photos from linked listings. Condition and included items apply only to the specific listing.

Technical data

Manufacturer: Märklin
Reference: 67014
Model size: Z
Scale ratio: 1:220
Track gauge: 6.5 mm

Z train controller and power supply included.

Single knob for speed and direction, operating from the central position.

Controller dimensions: 130 × 70 × 50 mm.

For analogue Z train operation; not advertised as a digital command station.

Suitable for planning an independent analogue Z circuit or shunting area. The 89983 turntable already includes a Z controller and power supply, so check that package before ordering an additional unit.

Plan the position and access first. Check dimensions and instructions before permanently securing any parts. This helps integrate the accessory into your layout while leaving space for maintenance and future extensions.

⚠️ USA VERSION · 120 V mains input. Do not connect directly to the 230 V mains supply used in Spain or Europe.

Model knowledge

Model history

One rotary knob adjusts track voltage and selects travel direction by turning away from its central position. Fine control supports a gradual start and progressive acceleration, useful when approaching platforms, shunting or moving slowly around a locomotive depot.

When planning the wiring, distinguish the mains input voltage from the power supplied to the track: the voltage in this article's version identifies the mains side. Always check the equipment rating plate and instructions before connection. Similar-looking controllers are not automatically interchangeable between different electricity supplies.

Documents and sources

Source 1 ↗